You can find a lot of information online about the GMAT. I will only write what I thought it was important. Although most of the information required for the math part is basic, I was surprised to notice that time passed and my knowledge about math was fuzzy sometimes and I also need it an update of the English equivalents of the terms used.

Integers = negative or positive numbers. Do not include fractions.
= odd or even.

a=b x q + r (q=quotient r=remainder)
Distinct numbers = cannot be equal
Prime numbers = a positive integer that has exactly 2 different positive divisor (1 and itself). 0 and 1 are not prime numbers
Absolute value of 5 is |5|

Divisibility rules:

• 6 is divisible by 2
• the factors of 20 are 1,2,4,5,10
• 20 is a multiple of 4

Remember:
Most problems at GMAT require more than one step in getting the right answer!
If you are not a native English speaker learn the technical terms!

Incoming search terms:

On data sufficiency GMAT problems all the drawings are useless in solving the problem. Also remember TIME is of the essence. If you written down more than three rows of formulas for any GMAT problem … STOP … click on any answer and move on. The closer you think you are to the answer, the more time you loose!

If a question asks “what is x?” it means: can a single value for x be found?

For data sufficiency GMAT problems, when see the word “percent” think part/whole

For a data sufficiency statement to be sufficient there must be as many equations as there are variables.

• A single equation with two variables cannot be solved
• Two distinct equations with the same two variables can be solved, using simultaneous equations

Just because there is only one variable does not mean an equation has just one solution.

• An equation with a variable raised to an even power may have more than one solution
• An equation with a variable raised to an odd power will have only one solution

Data sufficiency yes or no: if a statement answers the question in the affirmative or in the negative, it is sufficient.

The answer can be no!!!

Never assume!!!

Just because one statement seems to agree with the other does not mean they are necessarily saying the same thing. !!!

When you look at Statement 2 always cover up Statement 1 and think like you never saw it. !!!

Incoming search terms:

The essays for GMAT are 30 minutes each.

What you need to remember is:

• Nobody cares what your opinion really is
• Be superficial

Tips & tricks:

• When an entire paragraph contradicts with another use expressions like: on the one hand/on the other hand, the traditional view/the new view.
• When you support the main idea use: for example, to illustrate, for instance, because.
• When you use a second argument to support the main idea: furthermore, in addition, similarly, just as, also, moreover.
• The most important idea that you write must be introduced by one of the following words: surely, truly, undoubtedly, clearly, certainly, indeed, as a matter of fact, in fact, most important.
• The conclusion starts with: therefore, in summary, consequently, hence, in conclusion, in short.
• When you talk about the opinion that you argue against, start with: admittedly, certainly, obviously, undoubtedly, one cannot deny that, true, granted, of course, to be sure, it could be argued that.

Incoming search terms:

Before starting to write, at the analysis of an argument essay for GMAT, you must read the text carefully and identify the assumptions.

Paragraphs (as in the post about analysis of an issue):

1. Write the argument (copy/paste) and point the three weak points you identified.
2. Write the first weak point and write one reason ore more reasons why it is not true.
3. Write the second weak point and write one reason ore more reasons why it is not true.
4. Write the third weak point and write one reason ore more reasons why it is not true.
5. Write again the three weak points and say that because of those the argument is not “entirely logically persuasive”.

As an example:

1. The argument that … is based on … but omits certain important concerns that must be addressed to make this argument logically persuasive. The declaration that follows the explanation of what … simply explain …. This alone does not support the main argument.
2. First the argument assumes that … But …
3. Second the argument never concentrates on … Although …
4. Finally, the argument also does not deal with … However …
5. Thus the argument is not completely persuasive. The argument would have been more comprehensive and compelling if …

Incoming search terms:

What you need to remember is that GMAT geometry problems always involve more than one step and that when a GMAT problem offers you just a ratio as answer, without any numbers to start from, you need to plug-in any number in the formulas you use.

Some basic tools refer to remembering number replacement and measurements used by GMAT.

• You need to memorize the following approximations: Π = 3, √1 = 1, √2 = 1.4, √3 = 1.7, √4 = 2
• For those used with the metric system memorize this: 12 inches = 1 foot and 3 feet = 1 yard

Also any drawings that have written next: “not drawn to scale” can not be measured.

Going back to the uses that the people which are not native English speaker:

• Line = straight line that extends without end in both directions
• Line segment = part of a line from one point to another
• Right angle = 90
• Perpendicular lines = two lines intersect at right angles
• Parallel lines = two lines in the same plane that do not intersect
• Polygon = closed plane figure formed by three or more line segments called sides
• Vertices = point of intersection of the sides
• Triangle = 3 sides polygon
• Quadrilateral = 4 sides polygon
• Pentagon = 5 sides polygon
• Hexagon = 6 sides polygon
• 180 degrees = sum of the interior angle measures of a triangle
• (n-2) x 180 degrees = sum of the interior angle measures of a polygon with n sides

Degrees and angles

• 360 degrees = circle.
• 180 degrees = line

When two parallel lines are cut by a third line, there appear to be eight separate angles, but there are really only two.( If you do not understand that, maybe is time for you to “Google” some more)

Triangles

• One side of a triangle can never be longer than the sum of the lengths of the other two sides of the triangle, or less than their difference
• Equilateral = all sides of equal length (the angles are also equal)
• Isosceles = two sides of the same length
• Right triangle = a right angle (opposite side = hypotenuse, the others = legs)
• Perimeter = the sum of the lengths of the three sides
• Area = (base x altitude)

Pythagorean Theorem = in a right triangle, the square of the hypotenuse equals the sum of the squares of the other sides.

a² + b² = c²

3 – 4 – 5; 6 – 8 – 10; 12 – 5 – 13; 12 – 9 – 15

A right isosceles triangle: 45 – 45- 90 = 1: 1: √2

A 30 – 60 – 90 triangle: 1: √3: 2

Circles

• Circle = a set of points in a plane that are all located the same distance from a fixed point (the center)
• Chord = a line segment that has its endpoints on the circle
• Diameter = a chord that passes through the center of the circle
• Radius = a segment from the center of the circle to a point on the circle (r)
• Length of an arc of the circle = the degree of the arc/360
• Tangent to a circle = a line that has exactly one point (point of tangency) in common with a circle
• Circumference = the distance around the circle. C = 2 Π r
• Area A = Πr²

Rectangles, squares and other four-sided objects

• Parallelogram = a quadrilateral with both pair of opposite sides parallel. Area = base x heights
• Rectangle = Parallelogram with right angles. Area = length x width
• Square = rectangle with all sides equal
• Trapezoid = a quadrilateral with two sides that are parallel. Area = small base x big base x height/2

Solids, volume and surface area

• Rectangular solid = a three dimensional figure formed by six rectangular surfaces.
• Area = sum of the areas of all the faces
• Volume = length x width x height

Cylinder

• Area = 2 Π r² + 2 Π r h
• Volume = Π r² h

Coordinate geometry - Coordinate plane

• X – Axis = horizontal line
• Y – Axis = vertical line
• Point 1 = (x1, y1); point 2 = (x2, y2)

Line in a coordinate plane: y = m x + b

b = y- intercept. m = slope.

m (slope) = (y2-y1) / (x2-x1)

Incoming search terms: